There has been much written about the environmental impact of carbon extraction of oil. Although there are many drawbacks for carbon drilling, the majority of these are due to the fact that not all the carbon that is produced will be used for fuel. Canada’s oil and gas industry is working towards low carbon crude oil.
How do carbon oil and gas compare to carbon dioxide emissions? First of all, carbon dioxide is a natural pollutant. It’s the reason for pollution in the first place, and while it’s a particularly harmful pollutant when stored in oil reserves, it’s still perfectly acceptable. It’s unacceptable that carbon dioxide requires millions of years to be broken down in the atmosphere. After that, it is released into the atmosphere. There it can interact with wildlife and natural systems before being absorbed into the water and land. It also increases atmospheric pressure.
Cuscuta Island has two problems. First, Canada’s oil fields are located in or near carbon dioxide rich coastal soil. This means that any increase in atmospheric pressure will cause a greater amount of carbon dioxide to be absorbed by the soil, and oil wells will need to operate at higher pressures in order to extract more crude oil. Second, because carbon dioxide is an absorbent once oil is injected into the crust of the earth, it begins to get into underground aquifers which hold thousands of years of the natural storage of carbon dioxide. If nothing is done to alter the environment to make CO2 levels in the soil and aquifers are increased the life cycles of animals and plants that live in these areas are dramatically altered, sometimes wiping out entire species.
These types of potent greenhouse gas emissions must be taken seriously, not only because of their potential environmental impact however, they are a direct threat to the future of our civilization as well as the way of life on Earth. Scientists agree that fossil fuels such as oil, coal and natural gas need to be limited to preserve the world for future generations. Unfortunately, efforts to limit climate change to ensure that future generations are not severely impacted by the accelerating climate change as we address the current problems of pollution and greenhouse gases that are released by burning fossil fuels, are hampered by the constant rate of production of carbon dioxide in the atmosphere.
Carbon Oil’s unique carbon utilization and capture process was developed in the mid-nineties, but until recently, it was largely overlooked by the United States oil industry. One of the reasons for the delay in utilizing this unique capability is the fact that petroleum companies tend to focus on extraction, rather than utilization. Carbon Oil utilizes a unique carbon dioxide removal technology as well as utilization technology. It makes use of captured carbon through its highly efficient steam shower systems.
The way in which Carbon Oil’s carbon sequestration and carbon capture process works is straightforward in the natural world. Carbon Oil’s carbon capture system has pores that are isolated within the moist medium as well as isolated channels within the porous medium. This permits the absorption of carbon dioxide from the air and the use of carbon dioxide trapped as energy. The result is an extremely efficient system that eliminates the majority of carbon emissions from the atmosphere in comparison to other methods. The absorption of carbon dioxide is directly responsible for global warming which is among the most pressing problems that our planet is facing today.
Global Warming is a serious problem, and Carbon Oil’s unique CCS technologies permit them to take crucial measures to slow and eventually reverse global warming. Carbon Oil is not only an excellent alternative to crude oil, but it is also the cleanest and the safest method of biomass production currently available to the private investor. Carbon Oil is currently working with the University of California – Davis Institute of Chemical Engineering to better comprehend how oil harvesting and process impacts the environment. Carbon Oil will continue to expand and refine its business model to be better able to solve the current environmental issues.
The US Environmental Protection Agency has given support to the company for their Carbon Oil research project. The project is examining the negative environmental impact and energy savings that come with a carbon dioxide enhanced oil recovery (CAD) system. This technology allows the collection of, transportation, and utilization of carbon dioxide enhanced oil waste. Carbon Oil’s CAD technology permits the separation of liquids from heavy gas scrub and fuel oil operations.
know more C60 Oil here.